Innosilicon A10 is one of the most efficient Ethash ASIC miners on the market. Now the model has reached the 2Miners mining pool . The developers have updated the pool to add support for ASIC-compatible Stratum protocols and native NiceHash protocols. It may sound complicated, but the conclusion is one: now 2Miners users can more efficiently use ASICs like Innosilicon A10 and computing power rented from NiceHash.

Innosilicon A10 Specifications

This ASIC miner has the following parameters:

  1. hash rate – 500 MH / s (± 5%);
  2. consumption – 750 W (± 10%);
  3. cost – $ 2,500.

Comparison of the performance of the Innosilicon A10 and graphics cards

According to current estimates, the Innosilicon A10 will bring in $ 8.93 per day for the equivalent of $ 2,500. That is, with a stable exchange rate and network complexity, it will take a little more than nine months to payback . And if these parameters change, the payback period will also change. But in general, with the current rates of nine months, this is quite good

Now let’s calculate the price of 1Mh / s of computing power. If you buy the Innosilicon A10 for Ethereum mining, the price will be $ 5 – which is really cool. More old the ASIC-miners and video offers users megahesh per second for $ 9-10, so that the A10 is almost twice as effective as conventional mining-rig . At the

A farm of eight Nvidia 1070 graphics cards will consume approximately 1000 watts, while the Innosilicon A10 is only 750 watts. At the same time, this rig will give only 250 Mh / s, which is two times lower than the Innosilicon A10 hashrate. That is, in the end, ASIC is not only a more profitable purchase in terms of price, but also energy efficiency. Finally, it is much easier to fix than graphics cards

How to set up the Innosilicon A10 for mining

On the 2Miners mining pool , using the Innosilicon A10, you can mine both Ethereum and Ethereum Classic . We do not recommend mining cryptocurrency in solo with one ASIC. In this case, it is safer to join the PPLNS pool and receive a stable income.

The calculator 2CryptoCalc will tell you more about the predicted profit , which can calculate the approximate income per day and the average time of a block in solo. We recommend mining alone if the service predicts at least 1-2 blocks per day. And this requires at least ten Innosilicon A10 for Ethereum Classic and almost a hundred devices for Ethereum mining .

 

Block time for mining at 500 Mh / s. Source: 2CryptoCalc.com

There are mining settings on the page of each cryptocurrency. Here are the relevant parameters for mining Ethereum.

  1. URL: stratum+tcp://eth.2miners.com:2020
  2. WORKER: YOUR_ADDRESS.ASIC_ID
  3. PASSWORD: x

And here are the settings for mining Ethereum Classic using ASIC.

  1. URL: stratum+tcp://etc.2miners.com:1010
  2. WORKER: YOUR_ADDRESS.ASIC_ID
  3. PASSWORD: x

Innosilicon A10 miner status page

After starting mining, be sure to wait for the ASIC to accelerate. Typically, the device will need 10 to 30 minutes to reach the declared 500 Mh / s. Another important clarification: the pool determines the hash rate by the number of shares sent by the miner. So if in the first minutes the hash rate is equal to zero, this is absolutely normal.

Buy Innosilicon A10 ASIC Mniner

Recommended Posts